Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI B6200 — Trang 15/27

Code: 016-797

Description: Invalid Output Destination for Email Received
Causes: The address of the e-mail sent to this machine by using E-mail print faction is not correct. Specify the correct address, and resend the e-mail.

Code: 016-798

Description: No TrustMarking Option
Causes: No HD error is returned when calling S-Image lib by Decomposer. Install the required Option(HD).

Code: 016-799

Description: Print Instruction Fail detected in PLW
Causes: The combination of print parameters is not correct. [Tray paper size] of trays 1-4 are set to [Auto] on the operation panel, [Paper tray select] is set to [Auto], and print out in infinite form. Check the printing indication.

Code: 016-982

Description: -
Causes: When accessing HDD, detect Full status. Detect the error that Full is not released even though it is waited for while. (No page can be stored.) After execute or delete the job (documents) in the same HDD partition, execute the operation again.

Code: 103-203

Description: Machine Code Fail
Causes: Machine Code is not set when shipping from the factory. After the shipment, the data of Machine Code, or MCU PWB and ESS PWB are replaced incorrectly. Execute DC132 Serial No matching. When it is not recovered yet, Replace ESS PWB or MCU PWB in order. (Replacing both of them simultaneously is impossible.)

Code: 103-204

Description: Serial No. Fail
Causes: Serial No. is not set when shipping from the factory. After the shipment, the data of Serial No., or MCU PWB and ESS PWB are replaced incorrectly. Execute DC132 Serial No matching. When it is not recovered yet, Replace ESS PWB or MCU PWB in order. (Replacing both of them simultaneously is impossible.)

Code: 103-207

Description: All Machine Codes Mismatch
Causes: At least one of Product Codes which are maintained in three points are wrong value. Execute DC132 Serial No matching. When it is not recovered yet, Replace ESS PWB or MCU PWB in order. (Replacing both of them simultaneously is impossible.)

Code: 103-208

Description: All Serial No. Mismatch
Causes: At least one of Serial No. which are maintained in three points become wrong value. Execute DC132 Serial No matching. When it is not recovered yet, Replace ESS PWB or MCU PWB in order. (Replacing both of them simultaneously is impossible.)
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie