Mã lỗi OKI B8300n — Trang 5/9
Code:
Tất cả lỗi (71)
C1 00
E7 02
E7 03
E7 06
E7 50
EE EL
EE EU
F1 00
F1 00
F1 02
F1 03
F1 06
F1 08
F1 10
F1 10
F1 11
F1 11
F1 12
F1 15
F1 15
F1 19
F1 19
F1 20
F1 20
F1 30
F1 31
F1 32
F1 33
F1 34
F1 35
F1 36
F1 37
F1 38
F1 80
F1 80
F1 81
F1 87
F2 00
F2 02
F2 04
F2 05
F2 39
F3 12
F3 22
F9 02
F9 03
H2 00, H2 HL1
H2 01, H2 HL2
H3 00, H3 HL1
H3 01, H3 HL2
H4 00, H4HL1
H4 01, H4HL2
H5 01
L4 01
L4 02
L6 10
L8 01
L8 02
PF 00
U1 01
U2 00
U2 11
U2 12
U2 90
U2 91
U6 00
U6 01
U6 02
U6 03
U6 10
U7 00
Description: Console finisher (AR-FN7) punch (AR-PN1) backup RAM trouble. Punch unit backup RAM contents are disturbed.
Causes: Punch control PWB trouble Malfunction by noise
Remedy: Replace the punch control PWB.
Description: Finisher (AR-FN6) power abnormality. The 24V power is not supplied to the finisher PWB.
Causes: Improper connection or disconnection of connector and harness Finisher control PWB trouble Power unit trouble
Remedy: Use DIAG (SIM3-2) to check the sensor.
Description: Mail-bin stacker (AR-MS1) power abnormality. The 24V power is not supplied to the Mail-bin stacker PWB.
Causes: Improper connection or disconnection of connector and harness Mail-bin stacker control PWB trouble Power unit (AR-DC1) trouble
Remedy: Use DIAG (SIM3-20) to check the sensor operation.
Description: Console finisher transport motor abnormality. Transport motor trouble
Causes: Motor lock Motor rpm abnormality Overcurrent to the motor Console finisher control PWB trouble
Remedy: Use DIAG (SIM3-3) to check the motor operation.
Description: Finisher (AR-FN6) staple rotation motor trouble. Front staple rotation motor trouble
Causes: Motor lock Motor rpm abnormality Overcurrent to the motor Finisher control PWB trouble
Remedy: Use DIAG (SIM3-3) to check the motor operation.
Description: Toner control sensor output open
Causes: Connector harness trouble Connector disconnection
Remedy: Check connection of the toner control sensor. Check connection of connector and harness to the main PWB. Check for disconnection of harness.
Description: Toner supply abnormality. Toner control sensor output value becomes under-toner too earlier.
Causes: Connector harness trouble Toner control sensor trouble The toner cartridge seal is not removed
Remedy: Check connection of the connector in the toner motor section. Check connection of connector and harness to the main PWB. Check for disconnection of harness. Toner control sensor output check DIAG (SIM25-1) Remove the toner cartridge seal.
Description: Improper cartridge (life cycle error, etc.). An improper process cartridge is inserted.
Causes: IC chip trouble Improper cartridge
Remedy: Insert a proper cartridge.