Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI B930 — Trang 5/19

Code: E4-3

Description: Exit Sensor2 off JAM
Causes: The Exit Sensor2 is not turned OFF within the specified time after the Exit Sensor2 is ON.

Code: E4-5

Description: Exit Sensor2 ON, in FDT1/ Fin simp job
Causes: The Exit Sensor 2 was turned ON when the paper is delivered to the Exit 1 or Finisher.

Code: E4-6

Description: Exit Sensor2 Static JAM
Causes: Paper remains on the Exit Sensor2.

Code: E8-2

Description: Duplex Wait SENSOR ON JAM
Causes: The Duplex Wait SENSOR is not turned ON within the specified time after the Exit 2 MOTOR is ON.

Code: F4-12

Description: Finisher H-Transport Ent. SENSOR ON JAM
Causes: Finisher H-Transport Entrance Sensor is not turned ON within the specified time after the Exit Sensor in the IOT is ON.

Code: F4-16

Description: Finisher H-Transport Ent. SENSOR Static JAM A
Causes: Paper remains on the Finisher H-X'port Entrance Sensor.

Code: F4-17

Description: Finisher H-Transport Ent. SENSOR Static JAM B
Causes: Paper remains on the Finisher H-X'port Entrance Sensor.

Code: F4-22

Description: Finisher H-Transport Exit SENSOR ON JAM A
Causes: Finisher H-Transport Exit Sensor is not turned ON within the specified time after the Finisher H-Transport Entrance Sensor is ON. At this time, the Exit Sensor 1 in the IOT is On state.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie