Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI C3300n — Trang 5/7

Code: 169

Display: Service call 169: Error
Description: Upper Side Thermistor Error
Remedy: Is the error message displayed? Does the error recur?
Turn on the power supply again Turn on the power supply again after storage for 30 minutes.

Code: 170, 171

Display: Service call 170: Error 171: Error
Description: Thermistor Short circuit / Open circuit of the fuser is detected
Remedy: Check the cable connection between the ZAK board and TB3 board and turn on the power again. Replace the fuser unit. Replace the TB3 board.

Code: 172, 173

Display: Service call 172: Error 173: Error
Description: Thermistor Temperature abnormality (high or low) of the fuser is detected
Remedy: Check the cable connection between the ZAK board and TB3 board and turn on the power again. Replace the fuser unit. Replace the TB3 board.

Code: 174

Display: Service call 174: Error
Description: The short circuit of the backup roller Thermistor is detected. (For the high temperature)
Remedy: Check the cable connection between the ZAK board and TB3 board and turn on the power again. Replace the fuser unit. Replace the TB3 board.

Code: 175

Display: Service call 175: Error
Description: The open circuit of the backup roller Thermistor is detected. (For the low temperature)
Remedy: Check the cable connection between the ZAK board and TB3 board and turn on the power again. Replace the fuser unit. Replace the TB3 board.

Code: 176, 177

Display: Service call 176: Error 177: Error
Description: Temperature abnormality (high or low) of the backup Laura thermistor was detected
Remedy: Check the cable connection between the ZAK board and TB3 board and turn on the power again. Replace the fuser unit. Replace the TB3 board.

Code: 190

Display: Service call 190: Error
Description: System memory overflow
Remedy: Turn on the power supply again. Install an additional RAM DIMM.

Code: 200 ... 202

Display: Service call 200: Error 202: Error
Description: PU Firmware Download Error
Error occurs when the PU firmware is rewritten
Remedy: After the power supply is turned on again, try to download again. (Because this processing is not performed during usual operation, it does not occur.)
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie