Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI C3600n — Trang 4/7

Code: 131 ... 134

Display: Service call 131: Error 134: Error
Description: LED head detection abnormality (131=Y, 132=M, 133=C, 134=K)
Remedy: Is the LED head installed correctly? Does LED HEAD FUSE cut? Does the error recur?
Install the LED head correctly Check LED HEAD FUSE. Replace FUSE Turn on the power supply again Replace the LED head unit Please refer to chapter 7.5 for replace method of FUSE. Replace TB3 board

Code: 140

Display: Service call 140: Error 142: Error
Description: ID Up/Down position detection error
Remedy: Does it has anything trouble with the detaching/attaching of ID unit? Does the error recur?
Reinstall the ID unit. Turn on the power supply again Replace the high voltage power supply.

Code: 150 ... 153

Display: Service call 150: Error 153: Error
Description: Defective fuse cutting of ID unit
Is the ID unit installed correctly? Does the error reoacur? Does it restore by exchanging PRE board
Remedy: Is the ID unit installed correctly? Does the error reoacur? Does it restore by exchanging PRE board
Install the ID unit again Turn on the power supply again Replace PRE board after check the cable connection of PRE board - TB3 board Replace TB3 board

Code: 154

Display: Service call 154: Error
Description: Defective fuse cutting of belt unit
Remedy: Is the belt unit installed correctly? Does the error recur?
Reinstall the belt unit. Turn on the power supply again Replace TB3 board after check cable connection.

Code: 155

Display: Service call 155: Error
Description: Defective fuse cutting of fuser
Remedy: Is the fuser installed correctly? Does the error recur?
Reinstall the fuser after its connection connector is cleaned Turn on the power supply again Replace TB3 board after check the cable connection.

Code: 160 ... 163

Display: Service call 160: Error 163: Error
Description: Defective toner sensor detection It does not occur during shipping setting
Remedy: Is the toner cartridge installed? Is the lock level of toner set? Does the error recur? Does the error recur? Does the error recur?
Install a toner cartridge. Turn the lock lever of toner cartridge to the fixed position. Remove the right side cover, take measures to prevent the right side of the device from being exposed to ambient light, and confirm that the toner sensor is lighted during initialization of the device. Reconfirm it after replacing the toner sensor Assy. Replace the TB3 board.

Code: 167

Display: Service call 167: Error
Description: Thermistor Slope Error
Remedy: Is the error message displayed? Does the error recur?
Turn on the power supply again Turn on the power supply again after storage for 30 minutes.

Code: 168

Display: Service call 168: Error
Description: Compensation Thermistor Error
Remedy: Is the error message displayed? Does the error recur?
Turn on the power supply again Turn on the power supply again after storage for 30 minutes.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie