Danh mục sản phẩm

Code :

Code: 042, 043, 045
Display: Service call 042: Error 043: Error
Description: Flash File System Error
It failed to the access to CU Flash ROM that is attached to the BLA board directly.
Remedy: Replace TB3 board

Code: 052
Display: Power off/on 052:Error
Description: DMA Abort Error detected in Image processor.
Remedy: Does error reoccur? Power OFF/ON. Replace TB3 board.

Code: 070
Display: Power off/on 070:Error
Description: PSE firmware fault detected.
Remedy: Does error reoccur? Power OFF/ON. Replace TB3 board.

Code: 072
Display: Service call 072: Error
Description: Engine I/F Error I/F Error between PU and CU
Remedy: Replace TB3 board

Code: 073
Display: Service call 073: Error
Description: Video Error When the image data sprads, defect is detected. (Incorrect data receive)
Remedy: Does the error recur? Change the PC to high spec or lower the resolution, and then print again. Replace TB3 board

Code: 074, 075
Display: Service call 074: Error 075: Error
Description: Video Error When the image data spreads, defect is detected.
Remedy: Replace TB3 board

Code: 081
Display: Service call 081: Error
Description: Difference between version of CU firm and EEPROM
Remedy: Do EEPROM Initialization. (Turn on the power supply by Coveropen & pressing ONLINE switch & pressing CANCEL switch). Because the Mac address will disappear with this initialization, please reset Mac address by using the maintenance utility. Replace TB3 board

Code: 104
Display: Service call 104: Error
Description: Engine EEPROM mounting check is OK with turning on the power supply, after that, lead/ light error is detected
Remedy: Power supply OFF/ON Replace TB3 board

< 1 2 3 4 5 > Last ›

0