Description: Toner sensor detection error (160=Y, 161=M, 162=C, 163=K). This error does not occur with the printer in the factory shipped configuration.
Remedy: Is the toner cartridge installed? Is the toner slide shutter set? Install the toner cartridge. Turn it to the fixed position. Turn off and on the printer. Replace the toner sensor assembly.
Remedy: Does an error message appear? Does the error occur again? Turn off and on the printer. Turn off and on the printer after leaving it for 30 minutes.
Remedy: Does an error message appear? Does the error occur again? Turn off and on the printer. Turn off and on the printer after leaving it for 30 minutes.
Description: A fuser thermistor temperature error (high or low temperature) was detected.
Remedy: Does the error occur again? Does the error occur again? Turn off and on the printer. Replace the fuser unit. Replace the lowvoltage power supply, and then replace the CU/ PU board when the error occurs again.
Description: A backup thermistor temperature error (high or low temperature) was detected.
Remedy: Does the error occur again? Turn off and on the printer. Replace the fuser unit. Does the error occur again? Replace the lowvoltage power supply.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.