Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI C532dn — Trang 6/8

Code: 182

Display: SERVICE CALL 182:ERROR
Description: Option unit interface error
Remedy: Does the error occur again? Turn off and on the printer. Be sure of connector connection. Replace the option unit.

Code: 190

Display: POWER OFF/ON 190:ERROR
Description: System memory overflow
Remedy: Does the error occur again? Yes Turn off and on the printer. Replace the CU/ PU unit.

Code: 200 ... 202

Display: SERVICE CALL 200:ERROR 202:ERROR
Description: PU firmware download error
Remedy: An error occurred in re-writing the PU firmware. Turn off and on the printer, and then re-download it (In general use of the printer, this re-writing is not performed and this error does not occur).

Code: 203, 204, 207

Display: POWER OFF/ON
203:ERROR 204:ERROR
207:ERROR 208:ERROR
213:ERROR 214:ERROR
F0C:ERROR FFE:ERROR
FFF:ERROR
Description: CU program error (203 to 214 do not occur in general use of the printer)
Invalid processing was performed with a CU program.
Remedy: Invalid processing was performed with a CU program. Replace the CU/ PU board.

Code: 208, 213, 214

Display: POWER OFF/ON
203:ERROR 204:ERROR
207:ERROR 208:ERROR
213:ERROR 214:ERROR
F0C:ERROR FFE:ERROR
FFF:ERROR
Description: CU program error (203 to 214 do not occur in general use of the printer)
Invalid processing was performed with a CU program.
Remedy: Invalid processing was performed with a CU program. Replace the CU/ PU board.

Code: 209

Display: POWER OFF/ON 209:DOWNLOAD ERROR
Description: Custom Media Type table downloading failure
Custom Media Type table downloading failed.
Remedy: Custom Media Type table downloading failed. Turn off and on the printer, and then re-download it (In general use of the printer, this downloading is not performed and this error does not occur).

Code: 231

Display: SERVICE CALL 231:ERROR
Description: TAG interface error
A TAG interface error was detected. 01: A short-circuit error. 02: TAG communication error.
Remedy: Be sure the toner cartridges and the image drums are properly set. Replace the toner cartridges. When the error occurs again after the image drums are re-installed, be sure of the cable connection from the CU/PU board to the toner sensor board.

Code: 250

Display: POWER OFF/ON 250:ERROR
Description: SD card error
Remedy:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie