Mã lỗi OKI C5400 — Trang 2/8
Code:
Tất cả lỗi (60)
-
-
-
-
-
-
-
-
-
-
001
002, 006, 007
020
020
023
030
031
035
040
041
042 ... 044
051
051
070
072
073
074
104
105
106
121
122
123
124
126
127
131 ... 134
142
150 ... 153
154
155
160 ... 163
170 ... 171
172, 173 ... 177
174
175
176
181, 182
190
200, 202
203, 204, 210, 214
209
220
901, 902
903, 904
905
906
907
908
FOC, F0D, FFE, FFF
Code:
-
Display: WDT ERROR
Description: PU firmware went haywire.
Remedy: Does error reoccur? Turn on the printer again. Replace the PU board (PRN).
Code:
-
Display: COMMUNICATION ERROR
Description: An error in a PUCU interface.
Remedy: Is the CU assy installed properly? Does the printer recover from the error by replacing the ARC/ SPA board. Reinstall the assy properly. Replace the ARC/SPA board. Replace the PU board (PRN).
Display: Service call 001:Error(C5400 only)
Description: Machine Check Exception Hardware fault detected. (Board defectiveness or Shortage of power supply volume)
Remedy: Replace SPA board
Display: Power off/on 002:Error ~ 006:Error 007:Error(C5400 only)
Description: CPU Exception
Remedy: Does error display reappear? Power OFF/ON Replace ARC/SPA board.
Display: service 020:Error
Description: CU ROM Hash Check Error
Remedy: Does error display reappear? (the case of a device which program ROM is attached to board directly.) Power OFF/ON Replace ARC/SPA board.
Display: Service call 020:Error(C5400 only)
Description: CU Program ROM Hash Check Error
Remedy: Is program ROM DIMM set properly? Is error recovered by replacing program ROM DIMM? (the case of a device which program ROM is set to DIMM Slot.) Reset ROM DIMM Replace program ROM DIMM. Replace SPA board.
Display: Service call 023:Error(C5400 only)
Description: CU Font ROM Hash Check Error
Remedy: Does error display reappear? Power OFF/ON Replace SPA board.
Display: Service call 030:Error
Description: CU RAM Check Error
Remedy: Does error display reappear? Power OFF/ON Replace ARC/SPA board.