Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI C5400n — Trang 8/8

Code: 903, 904

Display: Power off/on 903:Error 904:Error
Description: Abnormal temperature detected by belt thermistor (high-temp or low temp.)
Causes: Is belt thermistor cable setting proper? Does error reoccur?

Code: 905

Display: Service call 905:Error
Description: An open error of frame thermistor (defective thermistor or improper connection) detected.
Causes: Does error reoccur?

Code: 906

Display: Service call 906:Error
Description: A short circuit error of frame thermistor (defective improper) detected.
Causes: Does error reoccur?

Code: 907

Display: Service call 907:Error
Description: A high temperature error (over 150°C) of frame thermistor detected.
Causes: Does error reoccur?

Code: 908

Display: Service call 908:Error
Description: A low temperature error (below [environmental temperature minus 10]°C) of frame thermistor detected.
Causes: Does error reoccur?

Code: F0C, F0D, FFE, FFF

Display: Power off/on 203:Error 204:Error 207:Error 208:Error 210:Error ~ 214:Error F0C:Error F0D:Error(C5400 only) FFE:Error(C5400 only) FFF:Error
Description: An error was detected of the CU program. (203~214 is not occure in usual operating.)
Causes: Reinstall the CU board. Is the error message displayed again?
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie