Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI C5650 — Trang 5/9

Code: 131 ... 134

Display: Service call 131:Error ~ 134:Error
Description: LED head fault detected. (131 = Y, 132 = M, 133 = C, 134 = K)
Causes: Is LED head properly set? Is the LED head fuse blown out? Does error reoccur?

Code: 142

Display: Service call 142:Error
Description: Error detected at ID position of Up/ Down(142 = C)
Causes: Is ID unit set properly? Does error reoccur?

Code: 150 ... 153

Display: Service call 150:Error ~ 153:Error
Description: ID unit fuse cannot be disconnected. (150 = Y, 151 = M, 152 = C, 153 = K)
Causes: Is ID unit setting proper? Does error reoccur? Is error recovered by replacing PRT board?

Code: 154

Display: Service call 154:Error
Description: Belt unit fuse cannot be disconnected.
Causes: Is belt unit setting proper? Does error reoccur?

Code: 155

Display: Service call 155:Error
Description: Fuser unit fuse cannot be disconnected.
Causes: Is fuser unit set properly? Does error reoccur?

Code: 160 ... 163

Display: Service call 160:Error ~ 163:Error
Description: Error detected by toner sensor. (160 = Y, 161 = M, 162 = C, 163 = K) It does not occure in factory default setting.
Causes: Is toner cartridge setting? Is toner lock lever setting? Does error reoccur?

Code: 167

Display: Service call 167:Error
Description: Thermistor Slope Error
Causes: Is an error message indicated? Is the error issued again?

Code: 168

Display: Service call 168:Error
Description: Compensation Thermistor Error
Causes: Is an error message indicated? Is the error issued again?
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie