Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI C7200 — Trang 8/9

Code: 382

Display: Open Stacker Cover 382: Paper Jam
Description: Paper jam detected in the Fuser unit or btwn the Fuser and paper ejection.
Remedy: 1) Is a paper jammed in the Fuser unit or between the Y ID and Fuser unit? 2) Is the Paper eject switch work normally? Remove the jammed paper. Replace the Fuser unit.

Code: 383

Display: Open Stacker Cover 383: Paper Jam
Description: Paper jam detected on paper entering the Duplex unit.
Remedy: 1) Is a paper jammed at the entrance of the Duplex unit or in the unit? Remove the jammed paper and close. Check the Duplex unit, or replace it.

Code: 390

Display: Check MP Tray 390: Paper Jam
Description: Paper jam during paper feed from the MP Tray.
Remedy: 1) Does misfeed occur around the MP Tray? Remove the misfed paper and close the cover. Check the MP Tray, or replace it.

Code: 391 ... 395

Display: Check Tray 391~395: Paper Jam
Description: Paper jam detected btwn a cassette and the B ID.
Remedy: 1) Is a paper jammed around the cassette or between the B ID and cassette. 2) Does the Paper entry switch operate normal? Remove the jammed paper. Replace the Paper entry switch.

Code: 400

Display: Open Stacker Cover 400: Paper Size Error
Description: Paper in a size different (45 mm or more) from the specification detected at the Printer engine.
Remedy: 1) Is the paper in a custom size? 2) Is the paper in the standard size? No action required. Adjust the Paper size guide of the cassette. Replace the Paper size board (PXC PWB).

Code: 410 ... 413

Display: Toner Low 410: Yellow 411: Magenta 412: Cyan 413: Black
Description: Toner in one of the four colors is running short.
Remedy: 1) Is the specified toner cartridge almost empty? 2) Does the Toner sensor of the specified cartridge operate normally? Replace it with a new toner kit. Replace the Toner sensor for the specified color.

Code: 480

Display: Remove Printed Papers 480: Stacker Full
Description: The stacker for ejected papers is full.
Remedy: 1) Is the stacker full? 2) Does the Stacker full sensor operate normally?
Remove papers from the stacker. Replace the Stacker full sensor.

Code: 490

Display: Load * Papers 490: No paper in the MP Tray ( *= A4, B5 etc.)
Description: The specified cassette has no paper or is removed. Or, the cassette be ingused for printing has no more paper.
Remedy: 1) No paper in MT? 2) Does the Paper out sensor operate normally?
Load papers in MT. Replace the Paper out sensor.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie