Mã lỗi OKI C810 — Trang 6/9
Code:
Tất cả lỗi (68)
-
-
-
-
-
001
002 ... 007
020
024 ... 025
030
031
036
040
041
042, 043, 045
051
052
070
072
073
074, 075
081
104
106
111
112, 113
121
122
123
124
126
127
128
131 ... 134
142
150 ... 153
154
155
160 ... 163
167
168
169
170, 171
172, 173
174
175
176, 177
181, 182, 183
190
200, 201, 202
203, 204, 207, 208, 214, F0C, FFF
209
230
231
250
251
252, 253
254
255
256
257
901 ... 904
918
923
928
980
983
984 ... 987
Display: Contact the Service center. 168: Error Note)
Description: Compensation Thermistor Error
Remedy: Is the error message displayed? Does this error recur? Turn on the power again. After leaving the printer for 30 minutes, turn on the power again.
Display: Contact the Service center. 169: Error Note)
Description: Upper side Thermistor Error
Remedy: Is the error message displayed? Does this error recur? Turn on the power again. After leaving the printer for 30 minutes, turn on the power again.
Display: Contact the Service center. 170: Error 171: Error Note)
Description: Short-circuit or open-circuit of fuser thermistor is detected.
Remedy: Does this error recur? Turn on the power again. Replace the fuser unit.
Display: Contact the Service center. 172: Error 173: Error
Description: The fuser thermistor has detected an abnormal temperature (high temperature or low temperature.)
Remedy: Turn on the power again. Does this error recur? Replace the fuser unit. Replace the low voltage power supply unit.
Display: Contact the Service center. 174: Error
Description: The backup roller thermistor is detected of its short-circuit. (At high temperature)
Remedy: Does this error recur? Yes Turn on the power again. Replace the fuser unit.
Display: Contact the Service center. 175: Error Note)
Description: The backup roller thermistor is detected of its opencircuit. (At low temperature)
Remedy: Does this error recur? Yes Turn on the power again. Replace the fuser unit.
Display: Contact the Service center. 176: Error 177: Error
Description: The backup roller thermistor has detected an abnormal temperature (high temperature or low temperature.)
Remedy: Does this error recur? Turn on the power again. Replace the fuser unit. Replace the low voltage power supply unit.
Display: Contact the Service center. 181: Error 182: Error 183: Error
Description: Option unit I/F error (181=Duplex Unit, 182=2nd Tray, 183=3rd Tray)
Remedy: Does this error recur? Turn on the power again. Check for sure connection of the connectors. Replace the option unit.