Description: A PU download data CRC check error. After PU data (PU firmware, custom media data and LED head adjustment data) downloading, a CRC check error was detected.
Remedy: Turn on the printer again and redownload the data (during usual printer operation, the downloading is not performed and the error does not occur).
Remedy: Is the CU assy installed properly? Does the printer recover from the error by replacing the CU board. Reinstall the assy properly. Remove the CU option(s) as a trial. Replace the CU board. Replace the PU board.
Remedy: Does error display reappear? Yes Power OFF/ON Replace CU PCB. Is program ROM DIMM set properly? Is error recovered by replacing program ROM DIMM? (the case of a device which program ROM is set to DIMM Slot.) Reset ROM DIMM. Peplace program ROM DIMM. Replace CU board.