Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI C9000 — Trang 7/9

Code: 340 ... 343

Display: Check Drum 340~343: Drum Error
Description: No ID unit detected when turning on the printer or closing the cover.
Remedy: 1) Is the error message displayed? 2) Is the ID unit mounted properly? 3) Does the error repeat?
Confirm the existence of the unit. Re-install the ID unit and turn off/on the printer. Replace the ID unit Assy.

Code: 350 ... 353

Display: Install New Drum 350: Y Drum Life 351: M Drum Life 352: C Drum Life 353: K Drum Life
Description: End of the ID unit life. more copies printed.
Remedy: Is it displayed soon after the ID unit replacement?
Confirm the life of the ID unit. Replace the ID unit.

Code: 360

Display: Install Duplex Unit 360: No Duplex unit
Description: The Duplex unit is removed from the printer.
Remedy: Recovered if the Duplex unit is inserted again? Normal Replace the Duplex unit or Engine board.

Code: 370

Display: Check DUPLEX 370: Paper Jam
Description: Paper jam detected after paper reverse in the Duplex unit.
Remedy: 1) Is a paper jammed in the Duplex unit? Remove the jammed paper. Check the Duplex unit, or replace it.

Code: 371

Display: Check DUPLEX 371: Paper Jam
Description: Paper jam detected at the Duplex unit
Remedy: 1) Is a paper jammed in the Duplex unit? Remove the jammed paper. Check the Duplex unit, or replace it.

Code: 372

Display: Check DUPLEX 372: Paper Jam
Description: Paper jam detectedd uring paper feed from the Duplex unit.
Remedy: 1) Does misfeed occur in the Duplex unit? Remove the misfed paper and close the cover. Check the Duplex unit, or replace it.

Code: 380

Display: Open Side Cover 380: Paper Jam
Description: Paper jam during paper feed from the Cassette 1, 2, 3, 4 or 5.
Remedy: 1) Does misfeed occur in the specified cassette? Remove the jammed paper and install the cassette. Check the Cassette 1, 2, 3, 4 or 5, or replace it.

Code: 381

Display: Open Stacker Cover 381: Paper Jam
Description: Paper jam detected btwn the B ID and Fuser.
Remedy: 1) Is a paper jammed between the Y ID and Fuser? 2) Is the load on the Fuser unit normal? Remove the jammed paper. Replace the Fuser unit.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie