Mã lỗi OKI C9200 — Trang 5/9
Code:
Tất cả lỗi (65)
-
-
-
-
-
001 ... 011
020
030
031
032
033
034
035
036
037
038
040
041
050
051
063
070
072
073 ... 075
100, 101
102
103
104
105
106
120 ... 122
123
124
125
130
131 ... 134
140 ... 142
150 ... 153
154
155
160 ... 163
170, 171, 174, 175
172, 176
173, 177
181 ... 186
310
320
330
340 ... 343
350 ... 353
360
370
371
372
380
381
382
383
390
391 ... 395
400
410 ... 413
480
490
491 ... 495
Display: Service Call 124: Error
Description: Inappropriate ambient temp. detected by a sensor.
Remedy: 1) Is the error message displayed? 2) Does the error repeat? Turn off/on the printer. Replace the temperature sensor.
Display: Service Call 125: Error
Description: Error detected at the MT home position.
Remedy: 1) Is the error message displayed? 2) Does the error repeat? Turn off/on the printer. Replace the MT.
Display: Service Call 130: Error
Description: Temperature rise at the LED head detected.
Remedy: 1) Is the error message displayed? 2) Does the error repeat? Turn off the printer, leave it for 30 min and then turn it on again. Replace the LED head unit.
Display: Service Call 131: Error ~ 134: Error
Description: No LED head unit detected when turning on the printer or closing the cover.
Remedy: 1) Is the error message displayed? 2) Is the LED head mounted properly? 3) Does the error repeat? Verify the installation of the LED head. Turn off/on the printer. Replace the LED head Assy.
Display: Service Call 140: Error ~ 142: Error
Description: Error detected with the D located at appropriate position.
Remedy: 1) Is the error message displayed? 2) Does the error repeat? Turn off/on the printer. Replace the Drum Assy.
Display: Service Call 150: Error ~ 153: Error
Description: Fuse in the ID unit has not been blown.
Remedy: Is the ID unit mounted properly? Yes Confirm the cable connection, or replace the Engine board.
Display: Service Call 154: Error
Description: Fuse in the Belt unit has not been blown.
Remedy: Is the Belt unit mounted properly? Yes Confirm the cable connection, or replace the Engine board.
Display: Service Call 155: Error
Description: Fuse in the Fuser unit has not been blown.
Remedy: Is the Fuser unit mounted properly? Yes Confirm the cable connection, or replace the Engine board.