Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI CX1145 — Trang 8/14

Code: CC30

Description: Stack transport motor abnormality
Remedy: MJ-1101 Is there any mechanical problem when the stack transport belt is moved? → →YES Fix the mechanism. NO Is the harness between the stack transport motor (M5) and the finisher control PC board (CN10) disconnected or open circuited? l → →YES • Reconnect the connector securely. • Replace the harness. NO 1) Replace the stack transport motor (M5). 2) Replace the finisher control PC board.

Code: CC31

Description: Transport motor abnormality
Remedy: MJ-1101 Is there any mechanical problem when the stack transport roller -1 and -2 are rotated? → →YES Fix the mechanism. NO Is the harness between the transport motor (M2) and the finisher control PC board (CN5) disconnected or open circuited? l → →YES • Reconnect the connector securely. • Replace the harness. NO 1) Replace the transport motor (M2). 2) Replace the finisher control PC board.

Code: CC40

Description: Swing motor abnormality
Remedy: MJ-1023/1024 Is the swing unit home position sensor (PI35) normal? → NO → Replace the sensor. YES Is the wiring between the finisher controller PC board and the swing motor (M36) correct? → NO → Correct the wiring. YES Is the swing mechanism normal? → NO → Fix the mechanism. YES 1) Replace the swing motor. 2) Replace the finisher controller PC board.

Code: CC41

Description: Paper holder cam home position abnormality
Remedy: MJ-1101 Is there any mechanical problem when the paper holder cam is rotated? → →YES Fix the mechanism. NO Is the harness between the paper holder home position sensor (S6) and the finisher control PC board (CN17) disconnected or open circuited? l → →YES • Reconnect the connector securely. • Replace the harness. NO 1) Replace the paper holder home position sensor (S6). 2) Replace the finisher control PC board.

Code: CC50

Description: Horizontal registration motor abnormality
Remedy: MJ-1023/1024 (when MJ-6004 is installed) Is the horizontal registration home position sensor (PI61) working normally? → NO → Replace the sensor. YES Is the wiring between the horizontal registration home position sensor and finisher controller PC board correct? → NO → Correct the wiring. YES Is the horizontal registration mechanism normal? → NO → Fix the mechanism. YES 1) Replace the horizontal registration motor (M62). 2) Replace the punch controller PC board. 3) Replace the finisher controller PC board.

Code: CC51

Description: Sideways adjustment motor (M2) abnormality
Remedy: MJ-1101 (When MJ-6101 is installed) Is there any paper remaining on the transport path? → →YES Remove the paper. NO Rotate the sideways adjustment motor (M2). Does it rotate smoothly? → →NO Fix the mechanism. YES Are the sideways deviation home position sensor (S3) and its wiring correct? → →NO Replace the sensor. Correct the wiring. YES Is the wiring between the hole punch control PC board (HP) and sideways adjustment motor (M2) correct? → →NO Correct the wiring. YES 1) Replace the punch sideways adjustment motor (M2). 2) Replace the hole punch control PC board (HP).

Code: CC52

Description: Skew adjustment motor (M1) abnormality
Remedy: MJ-1101 (When MJ-6101 is installed) Is there any paper remaining on the transport path? → →YES Remove the paper. NO Rotate the skew adjustment motor (M1). Does it rotate smoothly? → →NO Fix the mechanism. YES Are the skew home position sensor (S2) and its wiring correct? → →NO Replace the sensor. Correct the wiring. YES Is the wiring between the hole punch control PC board (HP) and skew adjustment motor (M1) correct? → →NO Correct the wiring. YES 1) Replace the skew adjustment motor (M1). 2) Replace the hole punch control PC board (HP).

Code: CC60

Description: Punch motor abnormality
Remedy: MJ-1023/1024 (when MJ-6004 is installed) Are the punch home position sensor (PI63) and punch motor clock sensor (PI62) working normally? → NO → Replace the sensors. YES Is the wiring between the sensors and finisher controller PC board correct? → NO → Correct the wiring. YES Is the punching mechanism normal? → NO → Fix the mechanism. YES 1) Replace the punch motor (M61). 2) Replace the punch controller PC board. 3) Replace the finisher controller PC board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie