Danh mục sản phẩm

Code :

Code: 052
Display: Service call 052:Error(C5900)
Description: DMA Abort Error detected in Image processor.
Remedy: Does error reoccur? Yes Power OFF/ON. Replace TBR/TB2-6 PCB.

Code: 070
Display: Power off/on 070:Error(C5900)
Description: PSE firmware fault detected.
Remedy: Does error reoccur? Yes Power OFF/ON. Replace TBR/TB2-6 PCB

Code: 072
Display: Power off/on 072:Error xx
Description: Engine I/F Error I/F error between PU-CU.
Remedy: Is CU assembly set properly? Is error recovered by replacing TBR/TB2-6 board?
Set properly. Replace TBR/TB2-6 PCB. Replace PU PCB (PRF)

Code: 073
Display: Power off/on 073:Error
Description: Video Error. A trouble was detected during image data development. (Illegal data received)
Remedy: Is the CU Assy installed properly? Redo the installation properly. Replace the TBR/TB2-6 PCB.
[Common] Reinstall or replace the optional RAM DIMM. Replace the interface cable.Redo the installation of the PC printer driver.

Code: 074, 075
Display: Power off/on 074:Error 075:Error
Description: Video Error Fault detected when image data is extended.
Remedy: Is CU assembly set properly? Set properly. Replace TBR/TB2-6 PCB

Code: 081
Display: Service call 081: ERROR
Description: Parameter consistency Check error
EEPROM or FLASH has become incapable of reading or writing.
Remedy: EEPROM or FLASH has become incapable of reading or writing. Replace the CU board if the problem remains after cycling the power.

Code: 104
Display: Service call 104:Error
Description: Engine EEPROM setting check is OK when power ON. Then detect read/ write error.
Remedy: Does error reoccur? Yes Power OFF/ON Replace PU PCB(PRF)

Code: 105
Display: Service call 105:Error
Description: An error detected by checking, at printer's powerom, EEPROM installation.
Remedy: Does error reoccur? Yes Power OFF/ON Replace PU PCB (PRF)

< 1 2 3 4 5 6 > Last ›

0