Remedy: Setting Delete the log in the following procedure:[5] + [C] + [POWER] → 4. Initialize database → 2. Log database (jobs and messages) (Note that all job and message logs will be deleted.)
Remedy: Setting Delete the journal file: [5] + [C] + [START] -> 4. Initialize DB - > 3. Language DB If the recovery is still not completed, reinstall the master data and application program.
Remedy: Setting Compare the serial number of the equipment with a number displayed with 08-9601. If they are different, enter the correct serial number at 08-9601, 08-9083. Remarks: Although a 12-digit serial number is printed on the identification label, register only 9 digits (3rd digit to 11th digit) for the serial number.
Description: Data Overwrite option (GP-1070) disabled
Causes:
Remedy: Setting Perform firmware installation (all firmware: OS, HDD, SYS, PFC Firmware, Engine Main Firmware, and Scanner Firmware) with the USB media. * When the function of the Data Overwrite option (GP- 1070) is deleted from the equipment, the service call “F200” occurs. Perform 08-3840 to install the Data Overwrite Enabler (GP- 1070). * If F200 occurs while High (“3”) is set for the security level (08-8911), it cannot be released by installing the firmware using the USB media. Install the Data Overwrite Enabler (GP-1070) by 08-384.
Remedy: SLG board Board check Combination of the firmware version • Check the combination of the firmware version of the system ROM, engine ROM, and scanner ROM. • Reinstall the scanner ROM firmware.
Remedy: SYS board cooling fan Check if the fan is rotating properly. If not, check if any foreign object is adhered. SYS board Check the connector (CN126) and relay connector.
Remedy: Setting . Diagnose the file system with [5] + [C] + [POWER] → 1. . Check F/S, and then recover the problem partition with [5] + [C] + [POWER] → 2. Recovery F/S. . If it is not recovered, reinstall the software after the HDD format.
Remedy: Setting 1. Reboot. 2. If it has still not recovered, reinstall the HDD software. 3. If it still persists after step 2, perform [3] + [C] + [POWER] → 3, and then reinstall the HDD software. Notes: User data will be deleted when [3] + [C] + [POWER] → 3 is performed.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.