Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI ES1220n — Trang 4/5

Code: 142

Display: Service call 142:Error
Description: Error detented at ID position of Up/ Down
Causes: Is ID unit set properly? Does error reoccur?

Code: 150 ... 153

Display: Service call 150:Error ~ 153:Error
Description: ID unit fuse cannot be disconnected. (150 = Y, 151 = M, 152 = C, 153 = K)
Causes: Is ID unit setting proper? Does error reoccur? Is error recovered by replacing PRD board?

Code: 154

Display: Service call 154:Error
Description: Belt unit fuse cannot be disconnected.
Causes: Is belt unit setting proper? Does error reoccur?

Code: 155

Display: Service call 155:Error
Description: Fuser unit fuse cannot be disconnected.
Causes: Is fuser unit set properly? Does error reoccur?

Code: 160 ... 163

Display: Service call 160:Error ~ 163:Error
Description: Error detected by toner sensor. (160 = Y, 161 = M, 162 = C, 163 = K) It does not occure in factory default setting.
Causes: Is toner cartridge setting? Is toner lock lever setting? Does error reoccur?

Code: 170, 171

Display: Service call 170:Error 171:Error
Description: Short circuit in fuser thermistor or open detected.
Causes: Does error reoccur?

Code: 172, 173

Display: Service call 172:Error 173:Error
Description: Abnormal temperature detected by fuser thermistor (high-temp or low temp.)
Causes: Does error reoccur?

Code: 181, 182

Display: Service call 181:Error 182:Error
Description: Option unit I/F error. (181 = Duplex Unit, 182 = Option Tray)
Causes: Does error reoccur?
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie