• Code: 203 ... 214
• Display: Service Call 203: Error 204: Error 207: Error to 214: Error Power Off/on nnn: p 0xFOC: Error 0xFOD: Error 0xFFE: Error 0xFFF: Error
• Description: CU Program Dysfunction
• Causes: Detected illegal process with CU program

• Code: 209
• Display: Power On/off 209: DOWNLOAD ERROR
• Description: Custom Media Table Download Error
• Causes: Failed to download custom media table.

• Code: 220
• Display: Service Call 220: Error
• Description: Print Satistic mismatch
• Causes: HDD was removed or replaced after print statistic is set to ON.

• Code: 230
• Display: Service Call 230: Error
• Description: RFID Reader not Installed
• Causes: 1) RFID read device error 2) Does the Error take place again?

• Code: 231
• Display: Service Call 231: Error
• Description: RFID Reader I/F Error
• Causes: An interface error was detected with the RFID reader device. 01: communication error between the RFID reader and the engine PCB. 02: the transceiver circuit error of the RFID reader. 03: communication error between the RFID reader and the Tag chip. 04: the RFID Tag detection error (more than 4 chips).

• Code: 240 ... 248
• Display: Service Call 240: Error to 245: Error 247: Error 248: Error
• Description: Engine Program Memory Error
• Causes: 240:Flash-memory hardware error 241:Duplex flash-memory error 242:Optional tray-2 flash-memory error 243:Optional tray-3 flash-memory error 244:Optional tray-4 flash-memory error 245:Optional tray-5 flash-memory error 247:Sub-CPU flash-memory error 248:Inverter flash-memory error

• Code: 910 ... 914
• Display: Power Off/on 910: Error to 914: Error
• Description: GDDC Error
• Causes: 910:Tray1 GDDC Error 911:Tray2 GDDC Error 912:Tray3 GDDC Error 913:Tray4 GDDC Error 914:Tray3 GDDC Error

• Code: 917
• Display: Power Off/on 917: Error
• Description: Belt Slit Sensor Error
• Causes: The belt is not running properly. Does the error message still appear after rebooting?