Danh mục sản phẩm

Code :

Code: 073
Display: Power OFF/ON 073 : Error
Description: Video error. An error was detected in expanding image data (an invalid data was received)
Causes: Is the CU/PU board installed properly? Does the error occur again?
Is the CU/PU board installed properly? Does the error occur again? Does the error depend on print data?

Code: 075
Display: Power OFF/ON 075 : Error
Description: Video error. An error was detected in expanding image data.
Causes: Is the CU/PU installed properly?

Code: 077
Display: Power OFF/ON 077 : Error
Description: VIC Illegal Decomp Error
Causes:

Code: 078
Display: Inspection is required. 078 : Error
Description: Communication Error with Operator Panel Unit
Causes:

Code: 081
Display: Inspection is required. 081 : Error
Description: Parameter matching check error
Causes: Reading from or writing into EEPROM or flash memory cannot be made properly.

Code: 098
Display: Inspection is required. 098 : Error
Description: Power Control Error
Causes:

Code: 104
Display: Inspection is required. 104 : Error
Description: An engine EEPROM read/write error was detected.
Causes: Does the error occur again?

Code: 106
Display: Inspection is required. 106 : Error
Description: Engine control logic error
Causes: Does the error occur again?

< 1 2 3 4 5 >

0