• Code: CBB0
• Description: Rear saddle stapler home position error
• Causes: Rear saddle stapler clinch unit Saddle control PC board
• Remedy: MJ-1106 Rear saddle stapler clinch unit Harness check Saddle control PC board (SDL) • Connector check (CN7) • Board check

• Code: CBC0
• Description: Saddle Stitch Finisher side alignment motor (M15) abnormality
• Causes: Side alignment motor (M15) Saddle control PC board (SDL)
• Remedy: MJ-1106 Saddle Unit If there is mechanical problem when the jog is moved, fix the mechanism Side alignment motor (M15) Harness check Saddle control PC board (SDL) • Connector check (CN7) • Board check

• Code: CBE0
• Description: Saddle Stitch Finisher folding motor (M17) abnormality. An encoder pulse interruption error or rotation abnormality occurs in the saddle stitch finisher folding motor.
• Causes: Folding motor encoder sensor (S34) Side alignment motor (M15) Saddle control PC board (SDL
• Remedy: MJ-1106 Folding motor encoder sensor (S34) • Sensor check (S34) • Connector check • Harness check Side alignment motor (M15) Harness check Saddle control PC board (SDL) • Connector check (CN11, CN14) • Board check

• Code: CC20
• Description: Saddle communication error
• Causes: Interface PC board (I/F) Finisher control PC board (FIN) Saddle control PC board (SDL)
• Remedy: MJ-1106 Interface PC board (I/F) • Connector check • Harness check Finisher control PC board (FIN) • Connector check • Harness check Saddle control PC board (SDL) • Connector check • Harness check Interface PC board (I/F) Board check Finisher control PC board (FIN) Board check Saddle control PC board (SDL) Board check Finisher control PC board (FIN) Update the firmware version of the finisher control PC board (FIN). Saddle control PC board (SDL) Update the firmware version of the saddle control PC board (SDL).

• Code: CC30
• Description: Stack delivery motor abnormality. Stack delivery motor abnormality: The stack delivery motor is not rotating normally.
• Causes: Stack edging HP sensor (SR8) Stack slide motor (M4) Finisher controller PC board
  Stack transport motor (M5) Finisher controller PC board
  Stack transport motor Finisher control PC board
• Remedy: Stack edging HP sensor (SR8) Check the connectors and harnesses between the stack edging HP sensor (SR8) and the connector J111 on the finisher controller PC board. Stack slide motor (M4) Check the connectors and harnesses between the stack slide motor (M4) and the connector J106 on the finisher controller PC board.
  MJ-1101 Stack transport belt If there is mechanical problem when the stack transport belt is moved, fix the mechanism. Stack transport motor (M5) Check the connectors and harnesses between the stack transport motor (M5) and the finisher control PC board (CN10).
  MJ-1106 Stack transport belt Move the stack transport belt. Fix any mechanical problem. Stack transport motor Check if the connector (CN17) on the finisher controller PC board is disconnected from the stack transport motor (M8) and the harnesses are open circuited. Correct if so.

• Code: CC31
• Description: Transport motor abnormality. Transport motor abnormality: The transport motor is not rotating or the stack transport roller -1 and -2 is not rotating normally.
• Causes: Transport motor (M2) Finisher controller PC board
  Transport motor Finisher control PC board
• Remedy: MJ-1101 Stack transport roller If there is mechanical problem when the stack transport roller -1 and -2 are rotated, fix the mechanism. Transport motor (M2) Check the connectors and harnesses between the transport motor (M2) and the finisher control PC board (CN5).
  MJ-1106 Stack transport roller -1 Stack transport roller -2 Rotate the stack transport roller -1 and -2. Fix any mechanical problem. Transport motor Check if the connector (CN10) on the finisher controller PC board is disconnected from the transport motor (M7) and the harnesses are open circuited. Correct if so.

• Code: CC41
• Description: Paper holder cam home position abnormality
• Causes: MJ-1101 Paper holder home position sensor (S6) Finisher controller PC board
  MJ-1106 Paper holder home position sensor Finisher control PC board
• Remedy: MJ-1101 Paper holder cam If there is mechanical problem when the paper holder cam is rotated, fix the mechanism. Paper holder home position sensor (S6) Check the connectors and harnesses between the paper holder home position sensor (S6) and the finisher control PC board (CN17).
  MJ-1106 Paper pusher cam Rotate the paper pusher cam. Fix any mechanical problem. Paper holder home position sensor Check if the connector (CN9) on the finisher controller PC board is disconnected from the paper holder home position sensor (S6) and the harnesses are open circuited. Correct if so.

• Code: CC51
• Description: Sideways adjustment motor (M2) abnormality
• Causes: Sideways adjustment motor (M2) Hole punch control PC board (HP)
• Remedy: MJ-1101/1106 (When MJ-6103 is installed) Transport path If there is any paper remaining on the transport path, remove the paper. Sideways adjustment motor (M2) • If there is mechanical problem when the sideways adjustment motor (M2) is rotated, fix the mechanism. • Check the connectors and harnesses between the hole punch control PC board (HP) and sideways adjustment motor (M2). Sideways deviation home position sensor (S3) • Sensor check • Harness check