Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI MB492 — Trang 2/5

Code: 073

Display: Power OFF/ON 073 : Error
Description: Video error. An error was detected in expanding image data (an invalid data was received)
Causes: Is the CU/PU board installed properly? Does the error occur again?
Is the CU/PU board installed properly? Does the error occur again? Does the error depend on print data?

Code: 075

Display: Power OFF/ON 075 : Error
Description: Video error. An error was detected in expanding image data.
Causes: Is the CU/PU installed properly?

Code: 077

Display: Power OFF/ON 077 : Error
Description: VIC Illegal Decomp Error
Causes:

Code: 078

Display: Inspection is required. 078 : Error
Description: Communication Error with Operator Panel Unit
Causes:

Code: 081

Display: Inspection is required. 081 : Error
Description: Parameter matching check error
Causes: Reading from or writing into EEPROM or flash memory cannot be made properly.

Code: 098

Display: Inspection is required. 098 : Error
Description: Power Control Error
Causes:

Code: 104

Display: Inspection is required. 104 : Error
Description: An engine EEPROM read/write error was detected.
Causes: Does the error occur again?

Code: 106

Display: Inspection is required. 106 : Error
Description: Engine control logic error
Causes: Does the error occur again?
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie