Description: PU firmware download error An error occurred in rewriting the PU firmware.
Remedy: An error occurred in rewriting the PU firmware. Turn off and on the MFP, and then redownload it (In general use of the MFP, this re-writing is not performed and this error does not occur).
Description: TAG interface error IA TAG interface error was detected. 01 : A short-circuit error. 03 : TAG communication error.
Remedy: Be sure the toner cartridges and the image drums are properly set. Replace the toner cartridges. When the error occurs again after the image drums are re-installed, be sure of the cable connection from the CU/PU board to the toner sensor board.