Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI MC342 — Trang 9/10

Code: 899

Description: CU Disconnect
In the situation that communication between CU and SU was able to establish, SU FW detected that CU FW had disappeared from a communications path (an USB line).
Remedy: Is the cable from the belt thermistor to the CU/PU board connected properly? Does the error occur again?
Connect the cable properly. Turn off and on the MFP. Replace the belt thermistor.

Code: 901 ... 904

Description: Belt temperature error
901: Short circuit
902: Open circuit
903: High temperature
904: Low temperature
Remedy: Is the cable from the belt thermistor to the CU/PU board connected properly? Does the error occur again?
Connect the cable properly. Turn off and on the MFP. Replace the belt thermistor.

Code: 918

Description: An alarm of Duplex Fan was detected.
Remedy: An error of a fan inside the Duplex. Is it reproduced by turning on thepower unit?
Review whether or not the Duplex is installed properly. Review whether or not the fan is installed properly. Replace the fan.

Code: 923

Description: A lock error with black image drum
The image drum does not revolve properly.
Remedy: The image drum does not revolve properly. Does the error display is provided again by turning off and on the MFP?
Be sure the image drum is properly installed properly. Replace the image drum unit. Replace the image drum motor.

Code: 928

Description: Fuser motor lock error
Remedy: The fuser does not operate properly? Does the error occur again?
Check that the fuser is properly installed. Replace the fuser. Replace the fuser motor.

Code: 933

Description: Tray-2 CPU clock frequency error
Remedy:

Code: 941, 942, 943, 944

Description: PU Error
A PU error was detected.
941 : Watch Doc Timer Error
942 : Detection of Unassigned Interruption
943 : CPU Error Detection 944 : Dcon Access Error
Remedy: Turn off and on the MFP. When this error occurs again, replace the CU/ PU board.

Code: 980

Description: Media jamming error around fuser.
Media is jammed by entangling around the fuser.
Remedy: Turn off the MFP. Replace the fuser.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie