Remedy: The ID does not rotate normally. Does the error display recur when the power is turned off once and back on? Check if the ID is installed normally or not. Replace the ID unit. Replace the ID motor.
Remedy: Is the fan (bottom right of the front) of the low voltage power supply block working? Is the fan connector connected normally? Check for sure connection of the fan connector. Replace the PU board. Replace the fan motor.
Remedy: Fan error inside the Duplex unit. Does the error recur when the power is turned off once and back on? Does the error recur when the power is turned off once and back on? Check if the Duplex unit is installed normally or not. Check if the fans are installed normally or not. Replace the fan.
Description: Scanner home position error The home position sensor does not become inactive in the designated period of time – The carriage does not move from the home position in the designated period of time.
Remedy: Power cycle the unit. If the power cycle does not work to recover from the error, the unit needs repair. The possible cause is the damage of the home position sensor, the belt that moves CIS, or the FB motor.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.