Description: A PU download data CRC check error. After PU data (PU firmware, custom media data and LED head adjustment data) downloading, a CRC check error was detected.
Remedy: After PU data (PU firmware, custom media data and LED head adjustment data) downloading, a CRC check error was detected. Turn on the printer again and redownload the data (during usual printer operation, the downloading is not performed and the error does not occur).
Remedy: Is the CU assy installed properly? Does the printer recover from the error by replacing the TBR/TB2-6 board. Reinstall the assy properly. Replace the TBR/TB2-6 board. Replace the PU board (PRF).
Remedy: Is the error issued again? Yes If RAM DIMM is installed, remove it, and turn the power off and on again. Replace the TBR/TB2-6 PCB. Install the RAM DIMM again. Replace the RAM DIMM.