Description: Condensation in the printer was detected. Condensation is likely to occur when machine is moved from cold to warm environments. Allow printer to come to temperature for a few hours.
Remedy: Condensation iss likely to occur in printers carried from the outside. Turn on the printer again after it is exposed to room temperature for two hours to half a day. Does the error reoccur? Yes Turn on the printer again after it is left alone. Replace the operator panel PCB (PRP)
Description: LED head fault detected. 131 = Yellow 132 = Magenta 133 = Cyan 134 = K (Black)
Remedy: Is LED head properly set? Is the LED head fuse blown out? Does error reoccur? Install the LED head unit properly. Check the LED head fuse. Change the fuse. Turn on the power again. Replace the LED head unit.
Description: ID unit fuse cannot be disconnected. 150 = Y, 151 = M, 152 = C, 153 = K
Remedy: Is ID unit setting proper? Does error reoccur? Is error recovered by replacing PRT board? Reset ID unit. Turn power ON again. After check connections of cable between PRT board and PU PCB, replace PRT PCB. Replace PU PCB (PRF)
Description: Fuser unit fuse cannot be disconnected.
Remedy: Is fuser unit set properly? Does error reoccur? After cleaning for fuser connector, reset. Turn power ON again. Check cable connections and replace PU PCB (PRF)
Description: Error detected by toner sensor. 160= Y, 161 = M, 162 = C, 163 = K
Remedy: Is toner cartridge setting? Is toner lock lever setting? Does error reoccur? Set toner cartridge. Turn a lock lever of toner to a fixed position. Replace toner sensor or assembly.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.