Causes: Jam due to non-arrival at the regist paper sensor – After feeding for a simplex document scan is started, the regist paper sensor does not become active. (Simplex)
Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.
Causes: Jam due to non-arrival at the reverse paper sensor – After feeding for a duplex document scan is started, the reverse paper sensor does not become active. (Duplex)
Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.
Causes: Jam due to document removal – In the middle of feeding for a simplex document scan, the document set sensor becomes inactive. (Simplex and Duplex)
Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.
Causes: Activation of the hopping sensor at document reversal – The hopping sensor becomes active when the reverse paper sensor is inactive. Multifeed of documents is detected. (Duplex)
Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.