Các lỗi thường gặp

Code :
  • Code: -
  • Display: SDRAM ERROR
  • Description: CU board (CU) DCON access error
  • Remedy: Does this error recur? Yes Turn on the power again. Replace the CU board.
  • Code: -
  • Display: CRC CHECK NG ( )
  • Description: CRC check error of the PU downloaded data
    The CRC check error is detected upon completion of the PU data downloading (PU firmware, Custom media data)
  • Remedy: After turning on the power again, perform downloading again. (This error does not occur during the normal operation because this processing is not carried out.)
  • Code: -
  • Display: LOADER VERSION
  • Description: PU board Flash ROM hash check error
  • Remedy: Does this error recur? Yes Turn on the power again. Replace the PU board.
  • Code: -
  • Display: WDT ERROR R14=XXXX
  • Description: PU firmware runaway
  • Remedy: Does this error recur? Yes Turn on the power again. Replace the PU board.
  • Code: -
  • Display: COMMUNICATION ERROR
  • Description: I/F error between PU and CU
  • Remedy: Is the CU assembly installed normally? Does this error recur?
    Re-install the CU assembly normally. Replace the CU board. Replace the PU board.
  • Code: -
  • Display: ASIC ERROR
  • Description: DCON access error
  • Remedy: Does this error recur? Yes Replace the CU board.
  • Code: 002 ... 005
  • Display: Restart the printer. 002: Error~ 005: Error
  • Description: CPU Exception
  • Remedy: Does the error display recur? If the RAM DIMM is installed, remove it and turn off the power of the printer and back on. Replace the CU board. Re-install the RAM DIMM. Replace the RAM DIMM.
  • Code: 020
  • Display: Service call 020: Error
  • Description: CU ROM Hash Check Error
  • Remedy: Does the error display recur? Yes Turn off the power of the printer and back on. Replace the CU board.
 1 2 3 4 >  Last ›
popup

Số lượng:

Tổng tiền:

Danh mục