Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI Pro8432WT — Trang 3/11

Code: 069

Display: Service call 069: Error
Description: Malfunction of the NIC chip was detected.
Remedy: Does this error recur? Yes Cycle the power. Replace the CU/ PU board.

Code: 070

Display: Power off/on 070: Error
Description: A PSE firmware error was detected.
Remedy: Does this error recur? Yes Cycle the power. Replace the CU/ PU board.

Code: 072

Display: Power off/on 072: Error.
Description: Engine I/F Error. I/F error between PU and CU
Remedy: Does this error recur? Yes Cycle the power. Replace the CU/ PU board.

Code: 073

Display: Power off/on 073: Error
Description: An error was detected during image data expansion.
Remedy: Does this error recur? Yes Cycle the power. Replace the CU/ PU board.

Code: 075

Display: Power off/on 075: Error
Description: An error was detected during image data expansion.
Remedy: Does this error recur? Yes Cycle the power. Replace the CU/ PU board.

Code: 077

Display: Power off/on 077: Error
Description: An error was detected during image data expansion.
Remedy: Does this error recur? Yes Replace the CU/ PU board

Code: 081

Display: Service call 081: Error
Description: Normal reading/ writing of EEPROM or Flash has become impossible.
Remedy: Does this error recur? Yes Cycle the power. Replace the CU/ PU board.

Code: 104

Display: Service call 104: Error
Description: The engine EEPROM implementation check at power on showed no problem, but after that a read/write error was detected.
Remedy: Does this error recur? Yes Cycle the power. Replace the CU/ PU board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie