Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Panasonic UF585 — Trang 5/11

Code: 411

Description: Received DCN after transmitting NSC.
Causes: Transmitter is not ready for polling communication. Password does not match between transmitter and receiver.

Code: 412

Description: No response within 12 seconds in NSS/DCS/MPS wait state. (After transmitting FTT)
Causes: Transmitter is defective. SC PCB is defective.

Code: 414

Description: No response received after transmitting 3rd NSC.
Causes: Password does not match between transmitter and receiver. Transmitter is defective. (No original, document jam, etc.)

Code: 415

Description: Remote side attempted to receive message from your machine in polling communication.
Causes: Inform the remote side that your machine does not have the polling transmission feature.

Code: 416

Description: Receiver did not detect post command, such as EOP, MPS, EOM, etc.
Causes: Transmitter is defective. Line quality is poor. (RTC signal is distorted due to line noise) SC PCB or MJR PCB are defective.

Code: 417

Description: Receiver returned RTN in response to post message.
Causes: Line quality is poor. (There are excessive errors in received data) SC PCB or MJR PCB are defective.

Code: 418

Description: Receiver transmitted PIN in response to PRI-Q from transmitter. (Transmitting operator requests voice contact)
Causes: Line quality is poor. (There are excessive errors in received data) SC PCB or MJR PCB are defective.

Code: 420

Description: T1 timer (35 sec.) elapsed without detecting 300 bps signal.
Causes: There is wrong incoming call.(nonfacsimile communication) Transmitter is defective. SC PCB or MJR PCB are defective.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie