Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Panasonic UF585 — Trang 7/11

Code: 490

Description: Sum of error lines exceeded the limit (Function Parameter No. 70) of 64 lines.
Causes: Line quality is poor. SC PCB or MJR PCB are defective.

Code: 494

Description: Interval between two EOLs was more than 10 sec. when receiver received message data.
Causes: Transmitter is defective. Line quality is poor. (EOL is damaged due to line noise) SC PCB or MJR PCB are defective.

Code: 495

Description: During reception, CD turned OFF or continued ON for long time. During communication, lost loop - current.
Causes: Line is disconnected. Transmitter is defective. SC PCB or MJR PCB are defective.

Code: 496

Description: CS of modem is not able to turn ON.
Causes: SC PCB is defective.

Code: 501

Description: Remote unit does not have compatible Modem.
Causes:

Code: 502

Description: During reception, CD turned OFF or continued ON for long time. During communication, lost loop - current.
Causes: Line is disconnected. Transmitter is defective. SC PCB or MJR PCB are defective.

Code: 503

Description: CS of modem is not able to turn ON during training.
Causes: SC PCB is defective. Line is disconnected.

Code: 504

Description: Polling is rejected from the remote station.
Causes: No polling original is set.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie