Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Panasonic UF7300 — Trang 3/4

Code: J72

Description: Read Point Sensor does not go ON within several seconds after the original starts feeding. (Information Code 030 is printed on the Transaction Journal instead.)
Causes:

Code: J74

Description: The Exit Sensor does not go ON within a predetermined time after the Sensor is activated.
Causes:

Code: J75

Description: The Exit Sensor does not go OFF within a predetermined time after the Sensor is activated.
Causes:

Code: J92

Description: The Original was pulled out when feeding an original.
Causes:

Code: J93

Description: The Original remained in the ADF.
Causes:

Code: J94

Description: The ADF does not go off after the predetermined time. Unexpected Jam timing (i.e. Original is too short, etc.)
Causes:

Code: U06

Description: CLOSE RIGHT COVER
Causes: 1. Right Cover is open. 2. Right Cover Sensor is disconnected. 3. Right Cover Sensor is defective.

Code: U07

Description: CLOSE JAM COVER
Causes: 1. Jam Cover is open. 2. Jam Cover Sensor is disconnected. 3. Jam Cover Sensor is defective.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie