Danh mục sản phẩm

Code :

Code: E5-19
Description: Scanner Line Synchronization
Causes: 1. SC/SPC PCB connector is disconnected. 2. SC/SPC PCB is defective.

Code: E5-40
Description: Sort Memory Abnormal
Causes: 1. Sort Memory defective. 2. SC PCB connector is disconnected. 3. SC PCB defective.

Code: E7-90
Description: Hardware Key Abnormal
Causes: 1. Incorrect Hardware Key is installed. 2. Hardware Key is defective.

Code: J01
Description: The Registration Sensor did not detect paper within a predetermined time after the Paper Feed Roller started rotating. (1st Feeder Unit)
Causes:

Code: J02
Description: The Registration Sensor does not detect paper within a predetermined time after the Paper Feed Roller started rotating. (2nd Feeder Unit)
Causes:

Code: J43
Description: Paper Jam in the Registration Sensor or Paper Path Sensor.
Causes:

Code: J44
Description: Paper Jam in the Paper Exit Sensor.
Causes:

Code: J71
Description: Original was longer than 39.3 in (1m). (Information Code 031 is printed on the Transaction Journal instead.)
Causes:

< 1 2 3 4 >

0