Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Panasonic UF780 — Trang 6/11

Code: 421

Description: Busy Tone is detected after sending NSF Signal.
Causes: Remote station disconnected the line. Wrong number is dialed.

Code: 422

Description: Content of NSF (or DIS) or NSC (or DTC) was invalid.
Causes: There is an incompatibility.

Code: 427

Description: DCN received to NSF/CSI/DIS transmitted
Causes: The interface is incompatible.

Code: 433

Description: .T.30 Protocol abnormal.
Causes: Defective remote station.

Code: 434

Description: CD (response from Modem) did not turn OFF within 180 sec. after receiver detected FLAG signal.
Causes: Remote unit is defective. SC PCB or MJR PCB are defective.

Code: 436

Description: DCN received after transmitting FTT.
Causes: Transmitter is defective or incompatible. Line quality is poor.

Code: 456

Description: Received relay transfer request or confidential document to distribute to an end receiving station or all confidential mailboxes are used.
Causes:

Code: 459

Description: Failed training in Phase C.
Causes: Line quality is poor. (Training signal is distorted due to line noise) SC PCB or MJR PCB are defective.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie