Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Panasonic UF780 — Trang 9/11

Code: 555

Description: Transmitted PIN after receiving EOR.
Causes: Line is faulty and Operator Call requested by RX side.

Code: 570

Description: Password or machine code did not match during remote diagnostic communication.
Causes:

Code: 571

Description: Remote unit did not have the remote diagnostic function.
Causes:

Code: 580

Description: Sub-address transmission to a unit that has their DIS bit 49 (NSF bit 155) OFF.
Causes: Sub-address transmission to a unit that has no Sub-address function.

Code: 581

Description: Sub-address Password transmission to a unit that has their DIS bit 50 (NSF bit 156) OFF.
Causes: Sub-address transmission to a unit that has no Sub-address function.

Code: 601

Description: ADF Door was opened during ADF transmission.
Causes:

Code: 623

Description: No original was in the ADF. (Builtin dialer engaged)
Causes: Operator removed the original from the ADF after dialing was completed. Original was not set properly in the ADF.

Code: 630

Description: Redial count over.
Causes: No dial tone detected. Sensor dial tone is not detected. (destination dependent) Busy tone is detected. (destination dependent) T1 timer (35±5 sec.) elapsed without a signal from the receiver.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie