• Code: SC901
• Description: Mechanical total counter error
  The mechanical counter is not connected.
• Causes: • Mechanical total counter defective • Mechanical total counter connector not connected

• Code: SC951
• Description: F-gate signal error 2
  When the IPU has already received the F-gate signal (laser writing start trigger signal), the IPU receives another F-gate signal.
• Causes: • SBICU defective

• Code: SC953
• Description: Scanner image setting error
  The settings that are required for image processing using the scanner are not sent from the IPU.
• Causes: • Software defective

• Code: SC954
• Description: Printer image setting error
  The settings that are required for image processing using the printer controller are not sent from the IPU.
• Causes: • Software defective

• Code: SC955
• Description: Memory setting error
  The settings that are required for image processing using the memory are not sent from the IPU.
• Causes: • Software defective

• Code: SC956
• Description: Scanner setting ID error
  The ID that is sent from the IPU for scanner parameter setting is different from expected.
• Causes: • Software error

• Code: SC957
• Description: Scanner return ID error
  The ID that is sent from the IPU for the scanner return signal is different from expected.
• Causes: • Software error

• Code: SC958
• Description: Scanner ready ID error
  The ID that is sent from the IPU for the scanner ready signal is different from expected.
• Causes: • Software error