Description: Polygon mirror motor error
Did not detect lock signal from polygon mirror motor within 10 seconds after motor ON signal; or, lost lock signal for continuous 1.5 seconds after signal was detected.
Description: Developer initialization error
Error reading ID sensor pattern during developer initialization.
Causes: • Forgot to remove heat seal from replacement PCU • ID sensor defective • TD sensor defective • Drum is not turning • Development roller is not turning • Right door not closed firmly
Description: Transfer roller leak error 1 ("+" leak)
A current leak signal for the transfer roller was detected. (Current feedback signal was not detected for at least 200ms).
Causes: • Transfer roller damaged • High voltage supply board defective • Poor connection between transfer unit and machine • Transfer unit set incorrectly
Description: Transfer roller leak error 2 ("-" leak)
A current leak signal for the transfer roller was detected. (Current feedback signal was not detected for at least 200ms).
Causes: • Transfer roller damaged • High voltage supply board defective • Poor connection between transfer unit and machine • Transfer unit set incorrectly
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.