• Code: 700
• Description: ARDF original pick-up malfunction
  After the pick-up motor is turned on, the original stopper HP sensor is not detected.
• Causes: • Original stopper HP sensor (output abnormal) • Pick-up motor defective (not rotating) • Timing belt out of position • ADF main board defective

• Code: 701
• Description: ARDF original pick-up/paper lift mechanism malfunction
  The original pick-up HP sensor does not activate three times consecutively after the pick-up motor has turned on.
• Causes: • Original pick-up HP sensor defective. • Pick-up motor defective • ADF main board defective

• Code: 722
• Description: Finisher jogger motor error
  The finisher jogger HP sensor does not return to the home position, or move out of the home position, within the specified time.
• Causes: • Jogger HP sensor defective • Jogger motor defective

• Code: 724
• Description: Finisher staple hammer motor error
  Stapling does not finish within 600 ms after the staple hammer motor turned on.
• Causes: • Staple jam • Stapler overload caused by trying to staple too many sheets • Staple hammer motor defective

• Code: 725
• Description: Finisher stack feed-out motor error
  The stack feed-out belt HP sensor does not activate within a certain time after the stack feed-out motor turned on.
• Causes: • Stack feed-out HP sensor defective • Stack feed-out motor overload • Stack feed-out motor defective

• Code: 726
• Description: Finisher shift tray 1 lift motor error
  Tray shift does not finish within the specified time after the shift motor turned on, or the stack height sensor does not activate within the specified time after the shift tray lift motor turned on.
• Causes: • Shift motor defective or overloaded • Shift tray lift motor defective or overloaded

• Code: 727
• Description: Finisher stapler rotation motor error
  Stapler rotation does not finish within the specified time after the staple rotation motor turned on, or the stapler does not return to its home position within the specified time after stapling finished.
• Causes: • Stapler rotation motor defective or overloaded • Stapler rotation motor connection loose or connector defective

• Code: 729
• Description: Finisher punch motor error
  After the punch motor is turned on, the punch HP sensor does not activate within the specified time.
• Causes: • Punch motor defective or overloaded • Punch HP sensor defective • Punch motor connection loose or connector defective