Description: Finisher stapler positioning motor error
After the stapler motor is turned on, the stapler does not return to its home position within the specified time, or the stapler HP sensor does not activate within the specified time after the stapler motor is turned on.
Causes: • Stapler positioning motor defective or overloaded • Stapler HP sensor defective • Stapler positioning motor connection loose or connector defective
Description: Finisher exit guide open/close motor error
After the finisher exit guide open/close motor is turned on, the open/close sensor does not activate within the specified time.
Description: Finisher lower tray lift motor error
The stack height sensor does not activate within a certain time period after the lower tray lift motor turned on.
Description: Startup without video output end error (K)
Video transfer to the engine is started, but a video transmission end command was not issued by the engine within the specified time.
Description: Startup without video input end (K)
A video transmission was requested from the scanner, but a video transmission end command was not issued by the scanner within the specified time.