Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio 1224C — Trang 10/17

Code: 727

Description: Finisher stapler motor error (500-sheet finisher)
Stapling does not finish within a certain time after the stapler motor turned on.
Causes: • Staple jam • Stapler overload caused by trying to staple too many sheets • Stapler motor defective • Defective finisher control board • Defective BICU • Defective Ex-IOB • Incorrect installation

Code: 728

Description: Finisher paper stack height error (500-sheet finisher)
The stack height detection lever does not return to its home position before going to detect the stack height.
Causes: • Stack height lever solenoid defective • Stack height sensor defective • Lever sensor defective • Main control board defective • Defective finisher control board • Defective BICU • Defective IOB • Incorrect installation

Code: 730

Description: Finisher stapler motor error (1000-sheet finisher)
The stapler does not return to its home position within a certain time after the stapler motor turned on. The stapler H.P sensor does not activate within a certain time after the stapler motor turned on.
Causes: • Stapler motor defective • Stapler HP sensor defective • Poor stapler motor connection • Defective finisher control board • Defective board • Defective BICU • Defective Ex-IOB • Incorrect installation

Code: 731

Description: • Output tray motor error (500-sheet finisher) • Exit guide plate motor error (1000-sheet finisher)
The tray upper limit sensor does not activate within a certain time after the tray motor turned on (500-sheet finisher). The exit guide plate HP sensor does not activate within a certain time after the exit guide plate motor turned on (1000-sheet finisher).
Causes: • Defective finisher control board • Defective BICU • Defective Ex-IOB • Incorrect installation 500-sheet finisher • Output tray motor defective • Tray upper limit sensor defective 1000-sheet finisher • Exit guide plate motor defective • Exit guide plate HP sensor defective

Code: 732

Description: Finisher shift motor error (1000-sheet finisher)
Roller shift does not finish within a certain time after the shift motor turned on.
Causes: • Shift motor defective • Shift HP sensor defective • Defective finisher control board • Defective BICU • Defective Ex-IOB • Incorrect installation

Code: 740

Description: Finisher communication error
• A connection error occurs. • The UART reports a communication error. • In cases other than paper transport, after an every-3-second command is sent, the finisher does not respond within 5 seconds.
Causes: • Defective finisher control board • Defective BICU • Defective Ex-IOB • Incorrect installation

Code: 750

Description: 1st paper tray unit communication error
• A connection error occurs. • The UART reports a communication error. • In cases other than paper transport, after an every-3-second command is sent, the paper tray unit does not respond within 5 seconds.
Causes: • Defective paper tray unit control board • Defective BICU • Defective Ex-IOB • Defective connection (Paper tray - main unit)

Code: 770

Description: Shift tray unit motor error
• The machine starts. → The tray motor operates for 2.2 seconds. → The sensor does not detect the operation. • The machine is printing. → The tray motor operates for 2.2 seconds. → The sensor does not detect the operation.
Causes: • Defective tray motor • Defective sensor • Defective shift tray connector
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie