• Code: 805
• Description: Startup without video input end error (Y)
  Video transfer to the engine is started, but a video transmission end command is not issued by the scanner within the specified time.
• Causes: • Defective controller board

• Code: 806
• Description: Startup without video input end error (M)
  Video transfer to the engine is started, but a video transmission end command is not issued by the scanner within the specified time.
• Causes: • Defective controller board

• Code: 807
• Description: Startup without video input end error (C)
  Video transfer to the engine is started, but a video transmission end command is not issued by the scanner within the specified time.
• Causes: • Defective controller board

• Code: 808
• Description: Startup without video input end error (R)
  Video transfer to the engine is started, but a video transmission end command is not issued by the scanner within the specified time.
• Causes: • Defective controller board

• Code: 809
• Description: Startup without video input end error (G)
  Video transfer to the engine is started, but a video transmission end command is not issued by the engine within the specified time.
• Causes: • Defective controller board

• Code: 810
• Description: Startup without video input end error (B)
  Video transfer to the engine is started, but a video transmission end command is not issued by the engine within the specified time.
• Causes: • Defective controller board

• Code: 818
• Description: Watchdog error
  While the system program is running, no other programs can run (due to a bus hold or endless loop).
• Causes: • Defective controller board

• Code: 819
• Description: Kernel abnormal end error
  A HDD error or a software error has occurred, terminating the SCS process, gwinit process, and finally the kernel program. A system process has exhausted the RAM.
• Causes: • HDD error • Software application error • RAM shortage