Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio 150

Code: SC101

Description: Exposure lamp error
The standard while level was not detected properly when scanning the white plate.
Causes: • Exposure lamp defective • Exposure lamp stabilizer defective • Exposure lamp connector defective • Dirty scanner mirror or scanner mirror out of position • SBU board defective • SBU connector defective • Lens block out of position

Code: SC120

Description: Scanner home position error 1
The scanner home position sensor does not detect the off condition during initialization or copying.
Causes: • Scanner home position sensor defective • Scanner drive motor defective • Scanner home position sensor connector defective • Scanner drive motor connector defective • IOB board defective

Code: SC121

Description: Scanner home position error 2
The scanner home position sensor does not detect the on condition during initialization or copying.
Causes: • Scanner home position sensor defective • Scanner drive motor defective • Scanner home position sensor connector defective • Scanner drive motor connector defective • IOB board defective

Code: SC122

Description: Scanner home position error 3
The scanner home position sensor detects the on condition while the scanner is returning to the home position.
Causes: • Scanner home position sensor defective • Scanner drive motor defective • Scanner home position sensor connector defective • Scanner drive motor connector defective • IOB board defective

Code: SC123

Description: Scanner home position error 4
The scanner home position sensor does not detect the on condition after the scanner returns to the home position.
Causes: • Scanner home position sensor defective • Scanner drive motor defective • Scanner home position sensor connector defective • Scanner drive motor connector defective • IOB board defective

Code: SC192

Description: Automatic SBU adjustment error
An error is detected during automatic SBU adjustment (SP4-903)
Causes: • SBU defective • BICU board defective • Exposure lamp stabilizer defective • Exposure lamp defective • Dirty white plate

Code: SC194

Description: IPU White Level Detection Error
The level of the white standard pattern detected by the IPU chip (on the BICU board) is too low.
Causes: • Exposure lamp defective • BICU board defective • Incorrect position of the white standard pattern • Dirty white plate • SBU board defective

Code: SC302

Description: Charge roller current leak
A charge roller current leak signal is detected.
Causes: • Charge roller damaged • Charge high voltage supply board defective • Poor connection of the PCU
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie