Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio 2027 — Trang 10/17

Code: 730

Description: Finisher stapler motor error (1000-sheet finisher)
The stapler does not return to its home position within a certain time after the stapler motor turned on. The stapler H.P sensor does not activate within a certain time after the stapler motor turned on.
Causes: • Stapler motor defective • Stapler H.P sensor defective • Poor stapler motor connection

Code: 731

Description: Output tray motor error (500-sheet finisher) Exit guide plate motor error (1000-sheet finisher)
The tray upper limit sensor does not activate within a certain time after the shift motor turned on. (500-sheet finisher) The exit guide plate open sensor or exit guide plate HP sensor does not activate within a certain time after the exit guide plate motor turned on. (1000-sheet finisher)
Causes: 500-sheet finisher • Output tray motor defective • Tray upper limit sensor defective 1000-sheet finisher • Exit guide plate motor defective • Exit guide plate HP sensor defective • Exit guide plate open sensor defective

Code: 732

Description: Finisher shift motor error (1000-sheet finisher)
Roller shift does not finish within a certain time after the shift motor turned on.
Causes: • Shift motor defective • Shift tray HP sensor defective

Code: 770

Description: Shift tray shift motor error
During a shift operation the sensor state did not change (off to on, or on to off) within 2.4 sec.
Causes: • Shift sensor defective • Shift motor defective

Code: 791

Description: Bridge communication error
The SBCU cannot communicate with the bridge unit properly when the finisher is installed.
Causes: • Poor connection between the main machine and bridge unit • SBCU board defective

Code: 792

Description: Finisher connection error
The SBCU cannot communicate with the finisher properly when the bridge unit is installed.
Causes: • Poor connection between the finisher and bridge unit • SBCU board defective

Code: 793

Description: Interchange communication error
The SBCU cannot communicate with the interchange unit properly when the duplex unit is installed.
Causes: • Poor connection between the interchange unit and main machine • SBCU board defective

Code: 800

Description: Startup without video output end error (K)
Video transfer to the engine is started, but the engine did not issue a video transmission end command within the specified time.
Causes: Controller board defective
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie