Description: Communication timeout error between SBCU and finisher
The SBCU cannot receive a response within 100 ms after 3 attempts after sending data to the finisher.
Causes: • Serial line connecting SBCU and finisher unstable • External noise • SBCU board and finisher main board connection defective or loose • Finisher main board defective • SBCU board defective
Description: Communication failure with CSS (RSS)
The communication from the copier was detected as abnormal at the CSS center. This error occurs when the acknowledge signal from the LADP does not complete normally.
Causes: • Occurred with an SC call, CC call, supply management call, user call, or CE call. • Timeout while no response from the LADP, and abnormal signal on the RS-485 line between PI and LADP.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.