• Code: 732
• Description: Finisher upper tray shift motor error
  The upper tray shift motor does not stop within the specified time.
• Causes: • Upper tray shift motor defective or overloaded • Upper tray shift sensor defective

• Code: 733
• Description: Finisher lower tray lift motor error
  The stack height sensor does not activate within a certain time period after the lower tray lift motor turned on.
• Causes: • Lower tray lift motor defective or overloaded • Upper stack height sensor defective • Lower tray lower limit sensor defective

• Code: 734
• Description: Finisher lower tray shift motor error
  The lower tray shift motor driving the lower tray does not stop within the specified time.
• Causes: • Lower tray shift motor defective or overloaded • Lower tray shift sensor defective

• Code: 800
• Description: Startup without video output end error (K)
  Video transfer to the engine is started, but a video transmission end command was not issued by the engine within the specified time.
• Causes: • Control board defective

• Code: 804
• Description: Startup without video input end (K)
  A video transmission was requested from the scanner, but a video transmission end command was not issued by the scanner within the specified time.
• Causes: • Control board defective

• Code: 818
• Description: Watch Dog Error
  While the system program is running, a bus hold or interrupt program goes into an eternal loop, preventing any other programs from executing.
• Causes: • System program defective • Controller board defective • Peripheral device malfunction

• Code: 819
• Description: Kernel mismatch error
  Software bug
• Causes: • Software application error

• Code: 820
• Description: Self-Diagnostic Error: CPU
  The central processing unit returned an error during the self-diagnostic test.
• Causes: • Controller board defective • Software defective