Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio 2035G — Trang 10/18

Code: 722

Description: Finisher jogger motor error
The finisher jogger HP sensor does not return to the home position, or move out of the home position, within the specified time.
Causes: • Jogger HP sensor defective • Jogger motor defective

Code: 724

Description: Finisher staple hammer motor error
Stapling does not finish within 600 ms after the staple hammer motor turned on.
Causes: • Staple jam • Stapler overload caused by trying to staple too many sheets • Staple hammer motor defective

Code: 725

Description: Finisher stack feed-out motor error
The stack feed-out belt HP sensor does not activate within a certain time after the stack feed-out motor turned on.
Causes: • Stack feed-out HP sensor defective • Stack feed-out motor overload • Stack feed-out motor defective

Code: 726

Description: Finisher shift tray 1 lift motor error
Tray shift does not finish within the specified time after the shift motor turned on, or the stack height sensor does not activate within the specified time after the shift tray lift motor turned on.
Causes: • Shift motor defective or overloaded • Shift tray lift motor defective or overloaded

Code: 727

Description: Finisher stapler rotation motor error
Stapler rotation does not finish within the specified time after the staple rotation motor turned on, or the stapler does not return to its home position within the specified time after stapling finished.
Causes: • Stapler rotation motor defective or overloaded • Stapler rotation motor connection loose or connector defective

Code: 729

Description: Finisher punch motor error
After the punch motor is turned on, the punch HP sensor does not activate within the specified time.
Causes: • Punch motor defective or overloaded • Punch HP sensor defective • Punch motor connection loose or connector defective

Code: 730

Description: Finisher stapler positioning motor error
After the stapler motor is turned on, the stapler does not return to its home position within the specified time, or the stapler HP sensor does not activate within the specified time after the stapler motor is turned on.
Causes: • Stapler positioning motor defective or overloaded • Stapler HP sensor defective • Stapler positioning motor connection loose or connector defective

Code: 731

Description: Finisher exit guide open/close motor error
After the finisher exit guide open/close motor is turned on, the open/close sensor does not activate within the specified time.
Causes: • Finisher exit guide open/close motor defective • Open/close sensor defective
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie