• Code: 921
• Description: Printer error 2
  When the application started, the necessary font was not on the SD card.
• Causes: • Font not on the SC card

• Code: 925
• Description: NetFile Function Error
  • The NetFile file management on the HDD cannot be used, or a NetFile management file is corrupted and operation cannot continue.
  • The HDDs are defective and they cannot be debugged or partitioned, so the Scan Router functions (delivery of received faxes, document capture, etc.), Fabric services, and other network functions cannot be used.( HDD status codes displayed on the debug console are described below.)
• Causes: • HDD defective
  • Power supply to machine cut occurred while writing data to HDD
  • Software error
  • Please refer to the detailed descriptions below for recovery procedures.

• Code: 953
• Description: Scanner image setting error
  The settings required for image processing using the scanner are not sent from the IPU.
• Causes: • Software defective

• Code: 954
• Description: Printer image setting error
  The settings required for image processing using the printer controller are not sent from the IPU.
• Causes: • Software defective

• Code: 955
• Description: Memory setting error
  The settings that are required for image processing using the memory are not sent from the IPU.
• Causes: • Software defective

• Code: 964
• Description: Printer ready error
  The print ready signal is not generated for more than 17 seconds after the IPU received the print start signal.
• Causes: • Software defective

• Code: 984
• Description: Print image data transfer error
  After a data transfer begins from the controller to the engine via the PCI bus, the transfer does not end within 15 s.
• Causes: • Controller (SIMAC) board defective
  • BICU defective
  • BICU - controller disconnected

• Code: 985
• Description: Scanned image data transmission error
  After a data transfer begins from the engine to the controller via the PCI bus, the transfer does not end within 3 s.
• Causes: • Controller (SIMAC) board defective
  • BICU defective
  • BICU - controller disconnected